Our wire cutting projects
Wire Sawing Kråkerøy
Wire sawing was used for the adaptation and expansion of a plot, to later be used in house construction. The vertical section pictured is approximately 80 m².
Read more
Rudskogen Motorpark
We were hired for our wire sawing and foundational techniques to make room for Rudskogen Motorpark's new 12x4 meter big screen. We wire sawed 2 straight surfaces totaling 80m² into the mountains which the foundation was anchored to, along with…
Read more
Riksdagen Stockholm
The project included preparation for the replacement of the watermain to the Old Town. Wire sawing on the quay-side (pictured), was completed in sections where the concrete wall was wire sawed into sections which were then lifted away and transported.…
Read more
Nydalen Subway Station Project
One of our larger wire sawing jobs took place in Nydalen, for Veidekke Construction. The project revolved around the expansion of Nydalen subway station, in order to increase capacity. Wirecut Nordic's contribution to the project focused on wire sawing and…
Read more
Removal of the Norsenga Bridge Kongsvinger
The purpose of this project was to increase traffic capacity as the existing bridge was too narrow, and offered very little in the way of pedestrian or bicycle traffic. Our part in the project was the bridge's demolition. A floor-saw…
Read more
Ekeberg Oil
A bit of information about the plant at Sjursøya Oslo has been a massive oil port for generations. It stores 40% of Norway's fuel, which is unloaded from large tankers and placed into fuel storage. Every day two 300 meter…
Read more
Wire Cutting of a Garage Floor
For this project we cut directly through a hilltop in two places, thereafter cutting through and forming the bottom and sides of the work area. The remaining hilltop was then blasted apart in such a way that the debris could…
Read more
Wire Cutting of a Cottage Plot in Skjæløy
For this project we needed to saw away portions of a hilltop to make room for an annex. There was no possibility of hoisting the required equipment into place, so a trailer was created and the saw was mounted to…
Read more
Wire Cutting of an Industrial Indoor Pool
In this instance, a hole was bored 8-10 meters into the ground. This allowed us to drop in a "blind-cut" system to saw 6 meters straight down into the ground. After all four sides of the space were cut and…
Read more
Dismantling of a Cable Drum Foundation
In this project we dismantled a large cable-drum foundation. The foundation itself rotated, in order to collect the cable and wind it around the drum.
Read more
Wire Cutting Bridge, Gardermoen
During the course of this project we were hired to cut apart smaller sections of the bridge, and prepare the structure for later extension by another entrepreneur. The bridge was further expanded and traffic diverted, allowing for the dismantling of…
Read more
